A Lexmark printer paper feed problem is one of the most common reasons people visit an office supply store and get a printer. Many people don’t know what to do when they have issues with their Lexmark printer, or when they have a problem with the paper feed.

It could be because of a spill, it could be because of a broken sensor, or it could be because of something else. Often, the problem with paper feed is because of something that you have done wrong. If your printer doesn’t produce any printouts for you, the chances are that you have done something wrong.

It could be because of the print files you have on your Lexmark printer. Take a look at the print queues. Ensure that there are no issues with the print queues and that you have followed the proper procedures for printing. We’ve covered some of the best ways to fix Lexmark Printer Problems with Paper Feed.

Preliminary Suggestions

The most common problem is for the printer to stop working altogether, this happens because of a short circuit. The first thing you should check is the power supply or the supply that supplies the printer with power.

Do not allow the printer to stay turned on with the power off on the paper feed, and this will create more heat and burn out the circuit board. It would help if you also shut down the machine as soon as you notice it has stopped working.

Solution 1- Remove the Damaged Paper Tray to fix Paper Feed Problem

Step 1: Remove the damaged paper tray

Step 2: Look right into the location of the printer where the tray goes.

Step 3: Look for two tan-colored rubber rollers near the top (ceiling) of this area. These are the rollers that get hold of and feed paper into the printer.

Step 4: Clean off the rollers with a dry cloth. Re-install the paper tray and also try printing once more.

Step 5: If the printer still will certainly not pull any paper, your feed rollers might be used. As a test, attempt flipping the rubber feed rollers from top to bottom as instructed listed below. CAUTION! Be mindful not to harm the rubber tires when doing this.

Step 6: Remove the paper tray and also thoroughly remove the rubber tire off among the roller wheels.

Step 7: Flip the rubber tire entirely as well as place it back on the wheel. Make sure the rubber tire is fully seated on the wheel.

Step 8: Repeat this treatment for the many other wheels.

Step 9: When you have tested both wheels, re-install the tray, and try printing again.

If wiping the rollers or turning them inside out deals with the issue, your feed rollers are used and also will need to be changed. Nonetheless, you ought to have the ability to proceed to utilize the printer until you can have the rollers replaced.

If the paper still does not feed on the tray, there may be added problems that might need service to the printer.

KEEP IN MIND: Before preparing a solution, make sure you are printing on simple duplicate paper. Otherwise, try printing once more with plain duplicate paper packed right into the tray.

Specific specialty documents, letterhead supply, label stock, and card stock are harder for the printer to feed and increase the feed rollers’ opportunities, not feeding the page.

Attempt level paper, even if this unique print media has operated in the past.

Solution 2: Check the Print Files inside the Paper Tray

You might also want to check your paper and make sure that the print files you have are excellent. You can often get print errors from your paper, which means that the documents aren’t doing what they are supposed to do. Follow these steps to check the Print Files.

Step 1: Open Printer and Scanner Option on Windows 10

Step 2: Select your Lexmark Printer and Click on Manage

Step 3: Click on print queue option to check the list of the print output job

Step 4: Delete them one by one and see if the issue is fixed

If it doesn’t work, follow the next solution.

Solution 3: Reset your Lexmark Printer

Unfortunately, it’s not easy to tell if your Lexmark Printer Paper Feed Not Working is normal wear and tear or a severe problem. There are some other signs that you should look for if you suspect a more severe problem. We recommend you reset it and check if the issue with paper feed has been resolved.

Step 1: With the printer turned on, detach the power cord from the printer’s rear.

Step 2: Unplug the power cord from the wall surface electrical outlet.

Step 3: Wait at least 30-60 seconds.

Step 4: Plug the power cord back right into the wall outlet.

Step 5: Reconnect the power cable to the printer.

Step 5: Restart the printer.

Your last clue would be to look at the area where the print head meets the paper, most of the time there is no interference, and when there is the print head is not touching anything. However, if the print head doesn’t touch anything, then the paper feed is probably broken.

Another problem that can cause Printer Paper Feed Not Working is moisture. It is prevalent for your printers to end up having a problem with moisture, especially if you keep the machine in a damp environment.

Moisture usually causes the paper feed to stop functioning, and if you notice this happening, you should test it. Just place a drop of water on the paper feed and see if it will work.

If it doesn’t work, then you should try to dry the area that is causing the problem by wiping it down with a clean cloth, and see if that helps. If it still doesn’t work, then you may need to replace the electronics.

FAQ

Why my Lexmark Printer is jamming?

Follow these steps to fix the problem: –

1. Cancel all the print jobs from the computer
2. From the output tray generally pull out any jammed paper
3. Remove the torn paper or pieces from the jammed tray
4. Reset printer

Why is my Lexmark Printer Not Printing?

We’ve covered this topic in briefly, you can find it here Lexmark Printer Not Printing

How do I Unjam my Lexmark Printer?

Follow these steps to fix the problem: –

1. Cancel all the print jobs from the computer
2. From the output tray generally pull out any jammed paper
3. Remove the torn paper or pieces from the jammed tray
4. Reset printer

Final Words

If you are still having issues, connect with our chat support team, and they’ll help you fix all the problems related to your Lexmark Printer Paper Feed via chat. This level of support is exclusively available for a certain period, so get the most of it.